ASCOM D62 - Bedienungsanleitung PDF herunterladen (Seite 77)

TD 92477GB

2009-12-08/ Ver. C

User Manual

Ascom d62 DECT Handset

14.2.2 Easy Replacement Procedure

During the Easy Replacement procedure, the LEDs of the handset and the charger follow

the same LED indications. This means that if the old handset has a broken display, the LED

indications on the charger and on the handset can be used to follow the replacement

procedure. Before and after easy replacement, the LEDs may have different LED

indications. For more details, see LED Indications during Easy Replacement on page 72.

IMPORTANT: Never remove a handset from the charger until the instructions in the

display or the LED tells you to do so (see status on the LED if the display is

broken). If there is an error indication it may be allowed to remove the

handset, see 12 Troubleshooting on page 65 for further instructions.

After the old handset has been in the charger, the new handset needs to

be placed in the charger regardless if the replacement was successful or

not. Failing to do so may result in malfunction and the new handset will

need to be sent for service.

Figure 13. Easy Replacement via DC4 Advanced Desktop Charger.

1On the new handset, press and hold

Note: Do not release until you are instructed to do so.

2 Put the new handset in the charger.

3 When the text "Start phone replacement?" is displayed, release .

Press "Yes" (left soft key).

The text "Follow the instructions. Each step can take several minutes." appears in

the display. Press "OK"(left soft key).

4, 5 When the text "Please insert old phone in charger" is displayed, replace the new

handset with the old handset. The handset can either be switched on or off.

Note: If the CR3 Rack Charger is used, the same charging slot has to be used for

both handsets.

The handset will be restarted and after a few seconds, the text "Saving settings. Do

not remove phone from charger" appears. The charger LED changes to slow

orange flashing.

New New Old

New

4, 8 5 67

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 90 91

Keine Kommentare

ASCOM D62 - Bedienungsanleitung Seite 77